1.Fill net pots with clay pellets, slightly lower or level off from top of net pots.
2.Put the vermiculite above the top of the clay pellets, creating a 1cm-high hillock.
3. Soak
4. Add 6 liters of water 5. Put net pots into the device
6. Use tweezers or toothpick to dig a small hole in the vermiculite, putting into seeds.
(The small hole is about 2 or 3 times bigger than the seed's diameter)
Then cover seeds with vermiculite.
Tips: wet the tweezers or toothpick, gripping the seeds.
7. cover with clear humidity domes.
8. The lefts button is set based on the plant varienties.
The right button is set to "seeding"
9. Adjust the grow light height till about 15cm.
After germination
10. Remove the humidity domes
11.Add nutrients based on the proportion of 200:1
(6 liters of water with 30ml of nutrients)
12. The right button is set to "growing"
The light is flexibly adjusted to be on or off.
Finally, hope you can be successful
没有评论:
发表评论